Solar Panel Maintenance Ideas

Posted on 14th June 2011 in solar

Solar panels are designed to capture the sun’s light and convert it into electricity. The panels feature an array of solar cells and are linked up to other compartments. They’re installed in groups of three or four in places where they can capture sunlight, often on the roof of homes and other buildings. To ensure your panels are able to function properly and provide adequate power, make sure that they are properly maintained.

Thankfully, these devices require only the minimum amount of upkeep. The heating pump is the really only component that features any moving parts and the only breakable part is the glass covering of the panels. Even though maintenance will be light, it’s wise to stay on top of it.

Inspecting your solar panels periodically is the first step. Dirt and other pieces of debris will have to be removed to prevent damage. Look at the owner’s manual supplied by the manufacturer to see how often you should check them. If there’s a reason to check them more frequently – a nearby tree for example – take that into consideration. Panels that are installed in exceptionally dusty environments will need to be inspected more often. If it helps, create a schedule or mark your calendar to keep track of the device’s maintenance.

In order to remove an accumulation of grime and dirt particles from the panels, scrub gently from time to time. Use soap and warm water to loosen the dirt and a clean cloth to wipe it away. Bird droppings are commonly found on solar panels, since they’re usually located on roofs. You’ll need to completely remove them to maximize the amount of sunlight that gets through to the solar panels. To avoid leaving streaks and water spots behind, cool the panels down with room temperature water before applying the soap.

Don’t remove the solar panels to clean them. That’s more work than it’s worth. You will have to use a ladder and some safety gear to climb up to them. A large amount of ladder and roof related accidents occur each year so it is very important that you take every safety precaution as you inspect and clean the panels.

In order to function properly solar panels must be kept completely clean. A dirty panel could mean that you get little or no use out of it. Cleaning them is not just cosmetic. It’s necessary if you want your solar energy system to perform its job.

There are other options besides climbing to the roof of your home. There is a tool available that allows a home owner to effectively clean their solar devices from the comfort and safety of the ground. Much like the devices used at a self service car wash, a long metal pole sprays a powerful steady stream of water. Most of the devices are intended to hook up to the water spigot in your yard.

Professional solar panel cleaners are also a possibility. These companies can send experts out to your home to inspect and clean rooftop solar panels. They have the proper tools and knowledge to keep them clean and working efficiently. Look in the phone book or online for local businesses that offer this service. Or ask the contractor that installed your system. Make sure you do your research and shop around for the company that offers the best overall deal.

Create Your Windmill – Energy Conserving Home-Made Wind Energy Generator

Posted on 1st March 2011 in wind energy

Wind generators have been around before many people today were born; however, they were not as effective back then as they are now. The technology keeps improving over a period of time. I love to compare the advancement such that to planes.

The original plane hardly got off the ground, and now mankind has made rockets and satellites that can reach millions of miles away, absolutely amazing!

Wind generators have made their own “rocket propelled” improvement also they’re noticeably better and seriously better then the past.

Wind energy generators have the facility to use energy and even store it for later use. Many individuals round the nation are combining wind generators and solar generators to form a self-powered and self-efficient house; this is the energy nature is putting directly in front of our faces! It’s now a good time to move to these renewable energy sources.

Now, you will still be able to use your power, you won’t have to go completely all green to use your own windmill kit, but it will actually help if you build an efficient one to save on the overall power – I have actually heard stories of the power corporations owing people money due to the quantity of energy they’re saving!

The wind generator uses the concept of the Conservation of energy, and uses the kinetic energy of wind by using the rotary blades to harness the wind as the shaft is turned. It is converted with drive pumps and other systems to go into the turbine and into electrical energy. It can be stored now or for later use.

Solar panels do a similar thing, except it uses daylight and converts it to warmth and light – and saves it to energy. Many of us use weather as an excuse, but if you live in a place with tiny wind, you probably have more sun, and if you don’t have that much sun, you almost certainly have tons of wind! Whatever your situation, you are able to save energy and save 100′s$ on your monthly bill as well!

There are lots of DIY guides out there which will tell you step-by-step on how you can build your own homemade windmill kit today, so why not start today?

Alternative Energy as an Option for Your Home

Posted on 28th February 2011 in energy

In this day and age, it is almost unavoidable, you hear about it all the time. Alternative energy. Just what is it and how can you benefit from it. Alternative energy basically just means using one form of energy in place of another. For example, wind instead of coal for electricity. There are many other examples. The rate of new discovery, no doubt will soon find us all using one form or another of alternative energies. Whether in our homes, cars or places of business, these

alternative energy

alternative energy

non-mainstream sources of energy are creeping in.

There are many benefits of using alternative energy in one form or another. Take for example less pollution. This isn’t a sermon on global warming or climate change, just a desire to live in a cleaner world. Research is continuing to make these new technologies more affordable to the public as expense is still a big issue. Some of the sources of alternative energies are still too expensive for many.

Of the many forms of alternative energy, what can you do to improve your energy situation? Especially for homeowners, there are many things you can do. Take solar panels, for instance. Solar panels have been around for quite some time. Their efficiency is increasing with newer research and the prices are coming down on them. Over the last ten years many companies have included solar panel consulting and installation to their services.

Another one you have heard of is wind power. For many of us, this is not directly feasible. Most of us live in urban areas or subdivisions that do not make it practical. Yet, for some, it is most definitely a viable alternative. If you own land and have the resources to have them put in, your energy costs could be reduced to zero. There are other alternative energy sources that can be employed in your home as well.

In order to drastically reduce energy costs, some people have used multiple forms of alternative energy. This is a viable goal for many of us to achieve. Indeed, there are yet other ways to use alternative energy to reduce energy bills over the long term. Hybrid and fully electric cars are really making headway. This may not be practical for everyone, but the prices on many of them are reasonable. These are just a few things to think about on how you can use alternative forms of energy in our life.

The author is an expert in renewable energy and solar energy in Scotland.

Home Made Wind Generators

Posted on 25th February 2011 in wind energy

Wind turbine generators have been around for a while. Wind energy had had many alternative applications, from milling wheat into flour, to powering large electrical plants, as well as many others. With the plethora of wind in numerous areas, questions have frequently arisen, how can I’m making a home-made wind turbine? Is there a technique to use wind power to supply electricity this way in my very own backyard? The answer’s yes you can. These are some basic principles to a home made wind turbine. First of all naturally you will need some type of wind source. Usually at least a consistent breeze of 10mph is advocated, but you can get away with less under certain circumstances. If you don’t have a consistent source or power, you can use the gusty times to help charge up batteries.

You’ll need a method to harness the winds energy. What most people usually relate with wind turbines is those giant wind generators with the huge propeller blades, or the windmill style that you see in pumps on homesteads and farms. Wind energy can be utilised and used with a homemade wind turbine without having to handle all that.

Now you’ll need to get a means to rein in the winds energy. When folk think about turbines they frequently imagine the great wind generators or the windmill style that you see in pumps on a farm. The good news is, is that wind power can be reined in and used with a homemade wind turbine without needing to handle such huge equipment.

Vertical axis turbines are the most recent development in wind power technology, and certainly use less moving parts to operate. Thanks to its vertical blade configuration, it can pick up wind from any direction, and does not have to utilise a fin to turn the entire unit in the direction the wind is coming from.

Vertical axis turbines look like a blower from a car heater except that they are built much better out of inventive and light-weight parts. Somebody that wants to make a home made wind turbine can easily find plans and specs for one or two models, and some firms will even sell ones that are constructed for you already.

Building Solar Panels To Generate Your Own Power

Posted on 25th February 2011 in solar power

Solar energy is undoubtedly an excellent way to lower electrical bills by making use of an ever-constant power source, the sun. Solar panels are usually costly to purchase, so quite often it is simpler to make them at home. Building solar panels is not easy, so you need to be sure to get the proper equipment and tools essential for the panels

Solar cells are usually made from silicon, but you can actually also create them from cuprous oxide. This particular substance is one of the first substances that was found to have a photoelectric effect, causing electricity to flow through a material. When building solar panels, you will need a range of different ingredients for this job, including a micro-ammeter, clip leads, copper, and metal snips. These items can be found at many hardware stores. A few home items are necessary also when building solar panels, like an electric stove, tap water, table salt, and sandpaper.

Start by cutting the sheet of copper employing your metal snips. Wash your hands to start with to get rid of any oil or grease. You must additionally wash the copper using a cleanser to eliminate any dirt. Making use of the sandpaper, thoroughly rub down the sheeting to get rid of any kind of corrosion or sulphide accumulation.

Position the dried and thoroughly clean copper onto your electric stove and put it on its highest heat. As the metal starts to heat, you should notice gorgeous shades and rainbow colours starting to form on the metal. Purple, orange, and red designs will start to coat the surface.

When the copper begins to get hotter, the colours disappear and then a black cupric oxide coating replaces them. This burnt layer will eventually flake off however, revealing the colours beneath. Once the burner begins to become red hot, the entire sheet of copper will be coated with a heavy black layer. Let the metal cook for half an hour, because a thicker coating is going to be able to flake off without difficulty.

Lift off the copper sheet and let it cool to room temperature prior to attempting to rub off the black layer. Lightly scrub the metal until all the black color is eliminated. Cut another sheet of copper and bend both pieces into a plastic jar, but keep them from coming in contact with each other. The cooked copper needs to be connected using the negative alligator terminal, even while the new one will need to get the positive terminal.

Combine heated water and table salt into the plastic container. Place this mixture into the sun, and you should see a moderate number of micro-amps in your current meter. Copper is a semiconductor, and that means you essentially have a working solar panel built from scratch.