Managing Home And Office Insulation And Draught Proofing To Save Money

Posted on 3rd March 2011 in energy

In many buildings, as much as 60% of the heat is lost through roof and the walls. Considering the monthly amount one spends on energy bills, this is a huge waste. You will actually spend more trying to replace what is lost. The only solution is to opt for home and office insulation and draught proofing to save money.

To enjoy the full benefits it presents, one must also think of all the other areas that contribute to heat loss. One of these is the hot water tank and the pipes delivering water. Heat escapes easily through metal when the environment is cold. This is why they should be insulated. This will ensure that the water stays hot for a long time.

Some of the heat is also lost through the floor. In case you have a wooden floor, you must lift the boards then lay mineral wool underneath. This must be supported by netting on the joists. If there are gaps between the skirting board and floorboards, it should be filled with ordinary tube sealant like silicone, which stops draughts.

Remember, though insulation is necessary, you should not block the under-floor airbricks placed on the outer wall, which help in ventilation. In case of poor ventilation, the floorboards will start rotting after some time. This leads to other expenses later on. Taking these steps before the actual draught proofing will help you get the best results.

Twenty percent of the energy lost from the house can be saved through draught proofing. Being an easy and cost effective exercise one must consider using it to reduce the energy bills. You will find the materials required for the exercise such as brushes, sealant and foams from home improvement stores. Before you purchase them, you should ensure that they meet the minimum standards.

It is important to bear in mind that balancing is required between ventilation and insulation . This is why you should not direct your efforts at sealing everything in sight. Actually if some of the rooms house solid fuel and gas fires, more insulation will be required. In some rooms, you might also need an extractor fan to eliminate condensation. This normally happens in the kitchen and the bathroom.

From all this, one thing is very clear; home and office insulation and draught proofing to save money has to follow the right procedure for it to be sustainable. Balancing all the factors involved will play an important role in ensuring that you not only lower the bills, but also prevent future expenses.

comments: Closed tags: , , ,

The Environmental Benefits Of Reducing VAT On Insulation

Posted on 26th February 2011 in environment

As a business owner you may already be aware that VAT has been reduced to 5 percent already in some fields of business in the UK. The Government, in fact, has been gradually reducing the rate from 1998 onwards until it reached 5 per cent for installation by professional installers of some energy-saving materials. Insulation installation also benefited from this break. This VAT rate reduction reveals an appreciation of the incentive powers of this option. Home owners, however, remain excluded from the benefits enjoyed by professional installers, should they opt to do the installation work on their own. The environmental benefits of the UK government reducing VAT on all insulation work to five percent would also benefit excluded classes, including home owners.

One group left out is the householder. Yet, under the credit crunch and falling market price of houses era we face, householders are likely to go the do it yourself route. Not surprising the Construction Products Association has seen the light and said it supports the extension of the reduced rate to those who decide to do renovations this way.

It has been noted that the market for thermal insulation has grown due to favourable regulation and rising energy prices. A reduced rate would enhance the appeal for this measure. A test mimicking the VAT exemption increased sales by 120 percent to reveal the potential of what is possible if this is done. This would lead to reduction in CO2 emissions.

As pointed out by the Construction Products Association many home owners are able to install insulation by themselves. However, they would pay the full rate for such an effort under the current paradigm. As we know buildings are the biggest single energy-using sector and account for 40 percent of energy consumption in Europe

It should be pointed out here a reduced VAT rate on insulation products may not be passed through by installers to their end customer. This has been assumed to be a reason why the use in the UK market has been low. When the householder is the installer this is not a factor; but, the higher VAT rate serves as a discouragement.

The tax revenue increase of a reduced rate in the Isle of Man indicates the economic benefits that may be achieved. There were also improvements in the current stock of housing and a reduction of pressure on development of green field sites. Yet, the UK government has not learned from the example of the Isle of Man. Were the Government to change its policy, it would signal the Government supports the role of consumers doing their part to help the environment this way, as they also help their own chequebook. Such action would encourage sustainable consumption. Installation of insulation reduces the use of heating fuels and the resultant savings are beneficial from the perspectives of both environmental impact and economic gain.

comments: 0 » tags:

Find Out Free Advice On Home And Office Insulation And Draught Proofing To Save Money

Posted on 27th January 2011 in energy

You could be losing money in energy bills simply because of draughts. Home and office insulation and draught proofing to save money. They do this by reducing the amount of heat which is lost from your building. Ventilation in the home is good as it helps to keep the air clean. However these need to be controlled rather than letting air come and go as it pleases. Gaps produce draughts which you have no control over. This means the amount of energy needed to heat your home increases.

A little bit of ventilation in the home is great, if you can control the way it works. Draughts are not able to be managed and so you need to find a solution to this issue. You will find that you are paying far too much in order to create a warm environment.

There are plenty of common problems which can be addressed quite easily. Fireplaces, mail boxes and keyholes all let cold air in and warm air out. The more difficult places are cavities in walls and old frames around windows. These can all be corrected without a large expense.

By solving all of your insulation problems you will be using the most cost effective way of cutting down on wasted energy. You can even do a lot of the work yourself if you are used to D. I. Y and spend about half the money you would spend hiring a professional. You will need to follow instructions and buy the right tools and equipment.

The investment is realized within a couple of years. This is seen through cheaper energy bills such as gas, electric and oil. When you are insulating it is worth checking all the areas which need attention. Look for problem spots such as floor boarding, wall cavities, draughts, loft insulation and hot water tanks.

You can lower the temperature of your thermostat as the heat that you will be conserving means the home feels warmer without using as much energy. It is worth taking a look at your windows to see if they can be made to work more efficiently too. Single glass should be upgraded to double glazing if this is possible.

Small jobs can be easily performed by you. Cover your letter box, insulate your boiler and put up some strips of foam or brushes around the windows. For the larger jobs of filling in walls and lining your loft or attic space it might be more cost effective to hire the services of a draught proofing company.